Farallon-communications NetopiaTM Uživatelský manuál

Netopia  ISDN PC Card User’s Guide for WindowsF onarall

10 Chapter 2 C ONNECTING YOUR INTERFACE TO THE PC C ARD To connect your interface to the PC Card, position the connector with the embossed a

Installation 11 W INDOWS 95 1. The first time you insert the Netopia ISDN PC Card, the New Hard-ware Found screen appears:2. Be sure that “Driver fro

12 Chapter 2 W INDOWS NT 4.0 1. Open the Control Panel and select Modems.2. Click Add in the Modems Properties screen.3. Select “Don’t detect my mod

Installation 13 4. Select Have Disk.5. Insert Netopia ISDN PC Card Disk 1, then click OK.The Netopia .INF file will be installed.

14 Chapter 2 6. The Netopia ISDN PC Card will be detected. Select Netopia ISDN PC Card, then click Next.7. Select COM Port, then click Next.8. Click

Installation 15 W INDOWS NT 3.51 1. Open the Accessories and select Terminal.2. From the Settings menu, select Communications, and the follow-ing s

16 Chapter 2 W INDOWS 3. X AND DOS 1. Make sure that a Card Services software is installed on your com-puter. This section uses CardSoft as an ex

17 Chapter 3 Windows Configuration Tool For Windows 95, Windows NT 4.0, and Windows NT 3.51, the Netopia ISDN PC Card Windows Configuration Tool provi

18 Chapter 32. Click Next in the window that appears:3. Specify where the Netopia ISDN PC Card software is to be installed. 4. Click Next. The Setup

Windows Configuration Tool 195. When the window below appears on your screen, click Finish.6. The Netopia ISDN PC Card Configuration Tool launches and t

Copyright © 1997 Farallon Communications, Inc. v.597All rights reserved. Printed in the U.S.A.This manual and any associated artwork, software, and p

20 Chapter 3PROFILE CONFIGURATIONNetopia ISDN PC Card configuration settings are saved into pro-files. Your Netopia ISDN PC Card is already equipped wit

Windows Configuration Tool 21 North American Profile Configuration window: International Profile Configuration window:A profile holds the phone numbers f

22 Chapter 34. For either the Primary or Alternate Location, the following parameters must be configured:Note: Communications using PPP or V.120 only u

Windows Configuration Tool 23UPDATING FIRMWAREThis section tells you how to load firmware into your PC Card’s ROM. You may need to do this in order to u

24 Chapter 32. Click the Properties button. The Card Properties screen appears:3. Perform one of the following:To download: Follow these steps:Differe

25Chapter 4 VT100 Configuration ToolFor Windows 3.x and DOS, the Netopia ISDN PC Card VT100 Con-figuration Tool provides a quick and easy way to complet

26 Chapter 42. Verify that the terminal emulation program uses the same COM port that the Netopia ISDN PC Card is emulating.3. Enter the following com

VT100 Configuration Tool 274. Select the B-channel protocol to be used. The protocol you select must match the protocol on the receiving system. Note:

28 Chapter 4PROFILE CONFIGURATIONNetopia ISDN PC Card configuration settings are saved into pro-files. Your Netopia ISDN PC Card is already equipped wit

VT100 Configuration Tool 29The North American and International firmware versions each have their own screen. North American version: International v

3 Contents Chapter 1 — About the Netopia ISDN PC Card...5Chapter 2 — Installation...

30 Chapter 43. For either the Primary or Alternate Location, the following parameters must be configured:Once complete, press Escape to exit the ISDN P

31Chapter 5 OperationOnce you have installed and configured your Netopia ISDN PC Card, you are ready to dial into your office or to the Internet. Comput

32 Chapter 5WINDOWS 951. Open Dial-Up Networking.2. Click Make New Connection. The Make New Connection Wiz-ard appears:3. Select the Netopia ISDN PC C

Operation 335. Click Finish.6. In the Dial-Up Networking window, double-click My Connection.7. Enter your user name and password, then click Connect.

34 Chapter 5WINDOWS NT 4.01. Open Dial-Up Networking.2. Click New. The New Phonebook Entry Wizard appears.

Operation 353. Click Next. The Server window appears:4. Check all the statements that apply, then click Next. The Phone Number window appears:

36 Chapter 55. Enter the phone number of the location you are calling, then click Next.6. Click Finish. This takes you back to the Dial-Up Networking

Operation 37WINDOWS NT 3.51For RAS connections, open the WFWNTEIC.INF file from the Neto-pia ISDN PC Card Disk with a text editor and add the entire co

38 Chapter 54. Enter the name and phone number of the location you are calling, then click OK.5. Click Dial.6. Enter your user name and password, then

Operation 39WINDOWS 3.X1. Ensure that ShivaRemote connectivity software has been installed on your computer.2. Click ShivaRemote Connect.3. Enter your

4 Contents Chapter 5 — Operation...31 Making a connection ...

40 Chapter 55. In the ShivaRemote Connect window, click Options.6. Enable at least one of the Desired Protocols (e.g., IPX or IP), then click OK.7. In

Operation 41DOS1. Ensure that ShivaRemote connectivity software has been installed on your computer.2. Enter the following command:C:\SHIVA\CONNECT3.

42 Chapter 56. Enable at least one of the Desired Protocols (e.g., IP or IPX), then select OK.7. Back in the Connect screen, enter your user name, pas

Operation 43For Windows 95 and Windows NT 4.0 only. When making long-dis-tance calls, the Country Code, Area Code, and PBX Prefix (if required) must be

44 Chapter 5USING OTHER COMMUNICATIONS APPLICATIONSYour Netopia ISDN PC Card works with any standard communications application that uses AT commands.

Operation 45DATA COMPRESSIONData compression is a process where the effective throughput is increased by encoding data in such a way that fewer bits a

47Chapter 6 TroubleshootingThis chapter provides information on troubleshooting problems that may arise while you are using your Netopia ISDN PC Card.

48 Chapter 6Depending upon the location you are dialing, there may be an incompatible local or toll telephone company. Though this is uncommon, if you

Troubleshooting 49 0x10 - Normal Call Clearing. As far as the ISDN network is concerned, the call completed normally, but one of the two devices chos

5 Chapter 1 About the Netopia ISDN PC Card Congratulations on your purchase of the Farallon Netopia  ISDN PC Card! The Netopia ISDN PC Card provid

50 Chapter 6pany to see how many digits their switches are expecting for the data rate (i.e., 56 kbps or 64 kbps per B-channel) that you intend to use

Troubleshooting 51THE “COM PORT IS EITHER IN USE OR UNAVAILABLE” OR “PORT NOT OPEN” ERROR MESSAGE APPEARS.An incorrect Interrupt Request Line (IRQ) ma

52 Chapter 6To stop the Xmit test, press Enter again; the Netopia ISDN PC Card responds with the following:Xmit test terminatedWarning: The IRQ may co

53Appendix A Technical SpecificationsNETOPIA ISDN PC CARD FIRMWARE SPECIFICATIONSSoftware Feature Supported on Terminal AdapterWAN Protocols • PPP (Poi

54 Appendix ANETOPIA ISDN PC CARD HARDWARE SPECIFICATIONSPC CARD CHARACTERISTICS The Netopia ISDN PC Card is an active communications card with its ow

Technical Specifications 55SUPPORTED ISDN SWITCH TYPES The following table lists the ISDN switch types and corresponding geographical regions supported

56 Appendix AREGULATORY NOTICES REGULATORY INFORMATION FOR THE UNITED STATES FCC Warning: Changes or modifications to this unit not expressly approved

Technical Specifications 57This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Ra

58 Appendix AProximity to Hazardous Voltages This information is provided for the benefit of manufacturers of PCs which include a PC Card slot. Users s

59Appendix B AT CommandsThe following table lists the Netopia ISDN PC Card AT commands. Commands marked with an asterisk (*) are configuration settings

6 Chapter 1 Your plug and play ISDN solution. Once your telephone company has installed your ISDN line, you can insert the Netopia ISDN PC Card into

60 Appendix BAT!E5=n V.120 N200 (Maximum Retry Count)AT!E6=n V.120 T203 (Link Integrity Timer) AT!E7=n V.120 Idle Timer AT!N1=n * ISDN Primary Direct

AT Commands 61AT>Hs View Help Information for Command sAT>VC View Current ProfileAT>VCC View the Call and COM Port Dynamic ParametersAT>VCD

62 Appendix BAT COMMAND RESULT CODES Result codes, or status messages, are displayed after an AT command is issued. Result codes can be displayed as a

63Farallon Technical Support Farallon is committed to providing its customers with reliable products and excellent technical support. Please take a mo

64 Farallon Technical SupportFARALLON BBSFarallon Bulletin Board Service: (510) 865-1321You can also contact the Farallon Bulletin Board Service over

Warranty LIMITED WARRANTY AND LIMITATION OF REMEDIESFarallon warrants to you, the end user, that the accompanying Farallon product, which may include

THE ABOVE WARRANTIES ARE MADE BY FARALLON ALONE, AND THEY ARE the ONLY WARRANTIES MADE BY ANYONE REGARDING THE ENCLOSED PRODUCT. Farallon and its lic

7 Chapter 2 Installation This chapter covers the three basic steps for installing your Netopia ISDN PC Card: (1) inserting the PC Card into your com

8 Chapter 2 S TEP 2: C ONNECTING YOUR EQUIPMENT Depending on the product you purchased, the Netopia ISDN PC Card with U interface or the Netop

Installation 9 S/T I NTERFACE Outside of North America, ISDN connections are made using the S/T interface. Plug the RJ-45 cable into your ISDN wall